nano-giga nano-giga nano-giga
Home Products Applications Careers Company Contact us

Solid-State Lasers

266nm CW DPSS Lasers SLM
 

Product description

_________________________________________

The DPSS CW deep UV Laser series FQCW-266 comes with a resonant frequency conversion stage, emitting a fixed wavelength of 266nm. The laser head is contained in a sealed aluminium housing, which allows operation in a wide range of environmental conditions. Heat removal from the laser head is done by air convection, no other provisions (chiller, fan etc.) are needed. The FQCW266-series of DPSS CW deep UV lasers deliver up to 200 mW at 266 nm in single frequency operation. Compared to other CW lasers at 266nm, the FQCW266 systems have a long coherence length of more than 1000 m, narrow line width (<300 kHz), low power consumption of less than 200W (average 100W) and a small footprint of only 380 x 270 mm. The FQCW-266 plug & play laser comes with a control unit, allowing either push button control or remote control operation via serial (RS232 & USB) interface. The lasers offer excellent beam quality with an M2 below 1.3 , beam divergence below 0.8mrad (full angle), low intensity noise below 0.5% rms (100 kHz-10MHz) and a good power stability (<1% in 8 hours)

DPSS Lasers SML & Multi-Mode
 
Product description

 

_________________________________________

 

- Blue Lasers
Lasers Bleu violet
- Green Lasers
Lasers vert jaune
- Red Lasers 
Lasers rouge
- IR Lasers 
Lasers infra-rouge
   

Laser DPSS single mode ou multimode

Q-switched Nd:YAG Lasers
 

Product description

_________________________________________

La famille de laser LOTIS TII Q-switched Nd: YAG comprend des dispositifs ayant différentes énergies de sortie d'impulsion, durée de 5 ns à 24 ns, divergence du faisceau et fréquence de répétition. Ils sont généralement équipés de convertisseurs intégrés ou externes jusqu’à créer la cinquième (213 nm) harmonique de la fréquence fondamentale du laser. L’installation de miroirs avec coefficient de réflexion variable dans certains modèles de laser offre l'excellente qualité de faisceau avec une bonne conversion en harmoniques. La double-impulsions laser déclenché présente un retard entre deux impulsions de sortie avec une précision de 1 ns. Il peut être utilisé dans la spectroscopie laser et vélocimétrie. Fiable et stable, les lasers LOTIS TII ont un fonctionnement simple, fournis avec la télécommande et l'interface de l'ordinateur.

Tunable Solid States Lasers
 

Product description

_________________________________________

Lasers solides accordables Ti:Saphir (Al2O3: Ti3 +) et lasers forstérite avec leurs convertisseurs de fréquence ils couvrent une large gamme spectrale UV (209 nm) à l'infrarouge (1360 nm). L’OPO de deux types permet d’élargir la gamme spectrale du laser solide de 230 jusqu’à 2300 nm. Appareils avec une commande d’interface PC sont disponibles.

Laser DPSS single mode ou multimode

 

Pulsed Micro-lasers
 

Description

High quality of pulsed laser systems “passively Q-switched laser” emitting wavelengths of 213 nm, 266 nm, 355 nm, 532 nm and 1064 nm for use in both OEM and scientific research - Applications in biotechnology, analytics, imaging, spectroscopy, sensor systems, micromachining, LIDAR...etc

CryLaS has a wide customer base in the industry field, thousands of lasers of the passively Q-switched laser series such as FTSS 355-50 have been supplied and are in industrial operation since many years. Product portfolio includs passively Q-switched,dye and DUV cw laser.   

Pulsed lasers from the IR to the deep UV ranges of the spectrum are widely used in biology, biomedicine, chemistry, analytics, micromachining and environmental technology.

CryLaS provides passively Q-switched laser systems (DPSS) emitting at wavelengths of 213 nm, 266 nm, 355 nm, 532 nm and 1064 nm with excellent beam quality.

Thousands of lasers of the passively q-switched series “FTSS 355-50” have been supplied and are in industrial operation for more than 7 years.

      _________________________________________________

 High Power Pulsed Laser Systems

High Power Pulsed Laser Systems

Key Features:

  • Plug and play
  • Air-cooled
  • Small footprint very compact
  • Short pulsed
  • TEM00
  • Closed loop control of output energy
  • Internal energy monitoring
  • User friendly
     

Applications: biology · biomedicine · chemistry · analytics · micromachining · environmental

 

•    Passively Q-switched DPSS (diode pumped solid state) lasers at 213 nm
FQSS213-50   NEW!
•    Passively Q-switched DPSS (diode pumped solid state) lasers at 266 nm
FQSS266-50 
FQSS266-200   
•    Passively Q-switched DPSS (diode pumped solid state) lasers at 355 nm
FTSS355-50 
FTSS355-300 
 
•    Passively Q-switched DPSS (diode pumped solid state) lasers at532 nm
FDSS532-150  
FDSS532-1000   

•    Passively Q-switched DPSS (diode pumped solid state) lasers at 1064 nm
DSS1064-450  
DSS1064-3000 

  Wide varity of options:

•    synchronisation siganl output (rise-time <2ns)
•    manual and electr. wavelength-switch
•    stand alone for CDRH compliance
•    fiber coupling SMA/FC
•    manual or electrical attenuator
•    manual or electrical beam blocker
•    external telescope... etc

 

      Low Power Pulsed Laser Systems


Low Power Pulsed Laser Systems

 

 

 

Applications: biology · biomedicine · chemistry · analytics · environmental

 

  • Passively Q-switched DPSS (diode pumped solid state) lasers at 213nm
    FQSS213-Q4  NEW!
  • Passively Q-switched DPSS (diode pumped solid state) lasers at 1064nm
    DSS1064-Q     DSS1064-Q4  NEW!